Academic and Administrative
Business Critical Systems
Campus Computing System Wide
IUPUI Data Center Specifications
The IUPUI Data Center serves business critical systems as well house host systems which may fall under Federal or other data protection requirements. This may include but is not limited to: FERPA, PCI, HIPAA, etc. IUPUI is serviced by UPS and backup generator. The IUPUI DC provides the campus computing system with 121 computer cabinets. UITS has co-location contracts with Ivy Tech Community College and the University of Michigan (Hathi Trust) with 20 computer cabinets supporting power as high as 15kW/cabinet.
The IUPUI DC is intended to, at minimum, support NIST Moderate and similar physical compliance requirements. UITS will work with each customer to mutually support compliance as required.
IUPUI Key Specifications
- Provide capacity for 141 cabinets (475kW)
- Cabinet maximum power capacity varies between 5k & 15kW depending on the location
- Cabinet voltage capacity: 208v
NOTE: 110v will have extremely limited support
- UPS 1&2 Battery capacity: 15 minutes
- UPS 3&4 / flywheel capacity: 12-15 seconds of run time at 100% load
- Generator capacity is available to support the entire IUPUI DC
- Cabinet weight ratings:
- Maximum compute aisle floor loading is 312 lbs. /sq. ft.
- Example: 312 lbs. * (8) sq. ft. cabinet = 2,496 lbs.
- Cooling is provided by Chilled water, CRAH cooling units
- Room operating temperature is 72F
- All Clients are responsible for data protection, integrity, and destruction
- All business critical systems are required to support redundant power supplies
- Where possible, users will utilize the Data Center rack management standards supporting common power grounding/bonding, cabinet interconnection, and internal rack wiring. Cables should be neatly dressed. All cables should be properly labeled so they can be easily identified. Refer to TIA/EIA-942 Infrastructure Standard for Data Centers, section 5.11
- Cabinet weight ratings will adhere to the raised floor, receiving, and staging room limitations
- Generator is available for power backup
- All third-party vendors will adhere to the design criteria of IUPUI DC.
- Any customization to IUPUI DC space will be funded by project owners and managed by UITS.
The shutdown sequence and durations will be based on load, outside temperature, chiller water flow rates, and total room load.
The average lead time for a cabinet solution is four to six weeks depending on quantity. UITS will work with each customer to minimize lead time. If desired, a client may pre-purchase standard equipment which would be installed on the compute floor in preparation for any pending server installations.
IUPUI RFP Specifications
Indiana University EPOD General requirements
Cabinet general requirements:
All cabinets to be APC model AR3157 29”W 42”D and 48RU tall
All cabinets to be no taller than 48RU tall
Maximum weight ratings of each cabinet not to exceed: 312 lbs./sq. ft.
All cabinets to be weighed and details provide prior to shipment.
All cabinets will have actual weight clearly marked
Each project to provide inside or “white glove” delivery of all equipment
Project is responsible to remove all packing material and trash. Recommend vendor be held responsible for this effort.
Note: Loaded equipment cabinets will be delivered directly to the computer floor
All devices to accommodate 208 volt
Each cabinet maximum power load can be obtained by contacting Data Center Operations (DCOPS)
All standard Cabinet Distribution Units (CDU’s) will be single-phase power distribution. Three-phase available.
CDU input connectors will utilize an L6-30 - 30 amp
All computer power cables are to be C13/C14 or C19/C20
All CDU’s, at minimum, provides for monitoring total power. Temperature, humidity optional.
Outlet level monitoring is optional
Switched outlets are optional
The Data Center is cooled with the use of chilled water delivered to CRAH units
Copper and fiber integration to follow University standards
Network egress to campus will utilize standard infrastructure through the "network" cabinets in each row
Network cabling will be mounted in the overhead cable management system
Project to provide patch cables